Grass Valley Ignite SDC - Manual (Page 64)

64 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix B — SD (PAL) Camera Block
Menu Item Setting
Each of the four use modes of the camera has a main menu ( Figure 35 ).
Figure 35. Main Menu - Halogen, Fluorescent, Outdoor Mode
• Each item of the main menu has a submenu, which consists of several
settings.
• These settings have been preset to the optimum values to suit each use
mode, and can be changed to suit actual shooting conditions.
1. Keep the MENU switch depressed for 5 seconds or more. The main
menu appears on the monitor screen.
2. Each time the MENU switch, ITEM/AWC switch, or NO/BAR switch
is pressed, the blinking item moves up or down.
3. When the YES/ABC switch is pressed after selecting the desired item
to blink, the submenu for the selected item appears on the screen.
4. Select the desired item to be changed in its settings using the MENU
switch and ITEM/AWC switch.
5. Press the YES/ABC switch or NO/BAR switch to change the settings.
6. Select [Return] using the MENU switch and ITEM/AWC, then press
the YES/ABC switch to return to the main menu.
7. After changing the settings, take the following steps. Select [End] using
the MENU switch and ITEM/AWC switch and press the YES/ABC
switch.
Submenus Overview
The following submenus are for Halogen Mode, Fluorescent Mode, and
Outdoor Mode on the NTSC version of the SD camera. User Mode sub-
menus are described in
User Mode Submenus Overview on page 69 .
Use mode
Blinking
8492_27_r0