Grass Valley UIM v.2.1.1 - Manual (Page 72)

72 UIM Instruction Manual February 5, 2008
Chapter 4 UIM-SAN-GEIP Installation: Grass Valley Open SAN System
CAUTION: Do not overwrite the license.dat file on the FSM since it
contains authorization strings for all client and server devices in the
Open SAN system. Use the following steps to append the
UIM-SAN-GEIP authorization string without deleting or modifying
information currently in the file.
To modify (append) the license.dat file on the FSM:
1. Locate the FSM for the Open SAN system. (You can select the primary or
redundant FSM it two FSMs are used.)
2. On the FSM, browse to the following file and open it with a text editor.
C:\MediaAreaNetwork\config\license.dat
3. Use the following steps to add the UIM-SAN-GEIP license data to the FSM
license.dat:
a. On the FSM, browse to the following file and open it with a text editor:
license.txt
b. Copy the file contents and paste to the end of the FSM license.dat file on the
FSM.
Example license.txt file contents:
# System: SAN1_UIM1
# Identifier: 65BF1485D
# Platform: NT
# Number Cpus: Unlimited
# Option: none
# License Authorization String:
client 1 NT 65BF1485D AAAAABWAAASCCY9TKBQSCNQMJKPSRER75A2RSHEE7P9DSLEM4RSA
SAN1_UIM1 GVG
NOTE: Only the authorization string is required for licensing. You can safely
modify the “System” text to match the UIM-SAN-GEIP host name.
c. Save changes.
4. If a redundant FSM is used, copy the master license.dat file to the following
location on the redundant FSM.
C:\MediaAreaNetwork\config\license.dat
5. When you have verified that the UIM-SAN-GEIP is correctly licensed on both
FSMs, continue with the next procedure “Test the UIM-SAN-GEIP functionality”
on page 79 .
!