Grass Valley Kaleido-Modular-X v.7.70 - Manual (Page 18)

14
Setting Up Your Kaleido-Modular-X System
Physical Setup
FlexBridge wiring for a 8 × 1 or 16 × 1 system
To connect the input and output cards in a Kaleido-Modular-X 8 × 1 or 16 × 1
• Bridge Input A to Output A, by connecting:
• INPUT A FLEXBRIDGE OUT A1 to OUTPUT A FLEXBRIDGE IN 1
FlexBridge wiring for a 8 × 2 or 16 × 2 system
To connect the input and output cards in a Kaleido-Modular-X 8 × 2 or 16 × 2
• Bridge Input A to Output A, by connecting:
• INPUT A FLEXBRIDGE OUT A1 to OUTPUT A FLEXBRIDGE IN 1
• INPUT A FLEXBRIDGE OUT A2 to OUTPUT A FLEXBRIDGE IN 2
INPUT A OUTPUT A
Rear panels for a KMX-3901-IN-8-D (left), and
KMX-3901-OUT-D (double panel shown on
right). The Flexbridge connectors are the
same on the KMX-3901-IN-8-D and
KMX-3901-IN-16-D card’s rear panels, and on
the output card’s single and double rear
panels.