Grass Valley Kameleon HD Multi-Function Modules v.2.1.0 - Manual (Page 35)

Kameleon HD Instruction Manual 35
Initial Configuration Process Overview
Status Web Page
The Status web page for the Kameleon HD modules ( Figure 21 on page 36 ,
KAM-HDD-FS module shown) provides an overall indication of the health
of the system and links to web pages for the active components:
• Status Header – the same on all Kameleon configuration pages (see Web
Page Operations and Functional Elements on page 28 ),
• Color-coded communication status for each component and path,
• Summary of all fault/warning conditions, and
• Textual module status, front module, and rear module properties.
Color-coded Status Indicators and Links
Each box represents a Kameleon front or rear module as indicated in
Figure 21 on page 36 . The KAM-HD-R link in the Rear I/O Module box
will take you to the I/O Config web page for setting input and output
names. The module link in the Front Processing module box will take you
to the Functional view web page containing the configuration links.
The arrows represent signal paths that may or may not be monitored. These
elements act as links when their function is active (indicated by underlined
function name).
Color code:
• Green = Pass – operating as expected.
• Yellow = Warning – signal is absent, has errors, or is misconfigured.
• Red = Fault – a component has failed.
• Gray = Not monitored.
Warning/Fault Summary
The warnings and faults are reported in the Warning/Fault summary
section of the Status web page as indicated in
Figure 21 on page 36 . When
a fault or warning is detected, it will be reported in this area. A Fault indi-
cates a serious condition that prohibits proper operation. A Warning indi-
cates a condition which may or may not adversely affect operating
conditions, but should be noted. Warnings may possibly be corrected by
changing configuration, settings or input signals.
Status/Front Module Properties
The Status/Front Module properties in the footer provide a textual
summary of the color-coded module status. Front module properties
provide hardware, firmware, software identification, and serial number
and asset tag assignment for the Kameleon HD module.
Use
this
link