Grass Valley NV9601 v.2.2 - Manual (Page 15)

5
NV9601
User’s Guide
Alphanumeric Display
The 8×42 alphanumeric display provides real-time feedback for the operators as they press
buttons to execute takes and other operations. The panel functions in two modes: X-Y or multi-
destination. The display changes according to the mode:
In either case, the display has 8 lines. Operators might need to scroll the display to see additional
information. (The scroll buttons can be used to scroll the display.)
Display Fields
The display has 4 columns:
• Information (not labeled).
The first entry in this column is “X - Y” or ‘MultiDest” unless you have entered salvo mode,
menu mode, or setup mode. See chapter 5 for those topics.
The bottom-most entry in this column is always the page number of the display.
In X-Y mode, the second entry is always the word “Dest” as a title for the third entry which
identifies the current destination. In the preceding illustration, the current destination was
VTR 1.
In MD mode, there are no entries in this column other than “MultiDest” and the page num-
ber.
• Lev/Dest.
In X-Y mode, this column identifies the levels of the currently selected destination. That des-
tination is identified in the information column. In the illustration above, ‘VTR 1’ was
selected. Operators might need to scroll to see or select a level.
In MD mode, the ‘Level/Dest’ column presents all the MD destinations defined in the
NV9601 configuration. (Actual destinations are defined in the NV9000 configuration.) Opera-
tors might need to scroll to see or select a destination.
• Status.
The status column indicates what source was routed to the destination.
X – Y –––––––– –––––––– HD X – Y –––––––– –––––––– HD
Dest CAM––1 SD Dest CAM––1 SD
VTR 1 CAM––1 AUDIO 1 VTR 1 CAM––1 AUDIO 1
+CAM––1 AUDIO 2 +CAM––1 AUDIO 2
+CAM––1 AUDIO 3 +CAM––1 AUDIO 3
+CAM––1 AUDIO 4 +CAM––1 AUDIO 4
–––––––– –––––––– TIMECODE –––––––– –––––––– TIMECODE
Page 1 Page 1
MultiDest CAM––1 VTR––1 MultiDest CAM––1 VTR––1
CAM––1 VTR––2 CAM––1 VTR––2
CAM––1 VTR––3 CAM––1 VTR––3
CAM––1 VTR––4 CAM––1 VTR––4
CAM––1 VTR––5 CAM––1 VTR––5
CAM––1 VTR––6 CAM––1 VTR––6
CAM––1 VTR––7 CAM––1 VTR––7
Page 1 CAM––1 VTR––8 Page 1 CAM––1 VTR––8
X-Y mode
Multi-destination mode