Grass Valley T2 Classic iDDR - Manual (Page 82)

82 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 6 Additional/Updated Functions for SP3 and SP4
5. Connect the VTR to your T2 and click Rec .
• If the batch capture items to which different reel names are set exist in the batch
capture list, a message appears. Insert a tape corresponding to the reel name into
the VTR and click OK . (If the same reel names are set in all batch capture items,
or if no reel name is set, a message will not appear and recording starts.)
• Recording starts and the progress is displayed in "Status".
• If you stop the batch capture click Stop .
• Clips that have completed recording are stored in the currently selected bin.
Setting In and Out points
The step for setting In and Out points to clips loaded to the P1/P2 channel has
changed. When either an In or Out point is set, the corresponding In or Out point is
set automatically, therefore, In and Out points can be set easily.
For example, if an In point is set to any position of the clip in which In and Out points
have not been set, the Out point is automatically set at the end of the clip. Click Set
to set the In/Out point.
If an Out point is set to any position of the clip in which In and Out points have been
set, the already set In point is automatically set. Click Set to update an In/Out point.
An Out point is set
automatically.
An In point is set
automatically.