Grass Valley TTN-CP-UNI - Manual (Page 3)

iii
Contents
Electromagnetic Radiation Notice v
Hardware Warranty and Software License vi
Parts and Service vi
Revision history vii
General 1
1.1 Front panel drawing 1
1.2 Connection drawing 1
2 Power connection 2
3 Connecting the CP-UNI to your PC 2
3.1 Selection of router level 2
3.2 Pin-out of RS-232 connector 2
3.3 Maximum cable length 2
4 NCB connection 3
4.1 Control bus structure 3
4.2 Maximum distance between NCB devices 3
4.3 Several routers in one system 3
4.4 Connecting control panels 3
4.5 Pin-out and cable type 4
4.5.1 RJ45 connectors 4
4.5.2 5-pin DIN connectors 4
4.5.3 RJ45 to 5-pin DIN converter 5
4.6 Control Bus configuration notes 5
5 Control panel configuration 7
5.1 Pre-set default level 7
6 Operating the CP-UNI 8
6.1 PANEL ENABLE 8
6.2 TAKE function 8
6.3 IN / OUTPUT SELECT 8
6.4 MULTIPLE LEVEL operation 8
6.5 Local programming (size and restrictions) 9
7 Programming Mnemonics with UNI-Soft 10
7.1 Connection to PC 10
7.2 How to get started with UNI-Soft 10
7.3 Main screen 11
7.4 OPTION button 12