Polaris 2004 Victory Vegas - Manual (Page 94)

92
MAINTENANCE
Rear Wheel
Alignment (cont.)
NOTE: Turn the axle adjusters about 1/16 of a turn at a time and monitor wheel alignment as you proceed.
5. Insert the universal tool (4) through the access hole in the
back of the swingarm and turn the axle adjuster bolt IN
(clockwise) to draw the axle back or OUT
(counterclockwise) to push the axle forward.
6. Recheck rear wheel alignment as outlined after each
adjustment. Readjust if necessary, until the marks on both axle
washers are in the same position in relation to swingarm marks
and the drive belt tension is correct (see Check Drive Belt
Tension, page 88).
7. When wheel is aligned according to the marks and drive belt
tension is correct, tighten the axle nut.
Torque: 65 ft-lbs (88 Nm)
4