Polaris 2003 Frontier - Manual (Page 63)

61
OPERATION
Starting the Engine
Do not depress the throttle until the engine starts.
1. Pull the kill switch (shut-off switch) up to the RUN position.
2. Turn the key to START and crank the engine. NOTE: There will
be a half second delay before the starter engages to allow the ACS
system to “wake up.”
3. After the engine starts, release the key to the ON position.
NOTE: The Frontier is equipped with a recoil for emergency starting.
See page 70.
Before starting the engine, always refer to all safety warnings
pertaining to snowmobile operation. Never start your snowmobile
without checking all components to be sure of proper operation.
See Pre-Ride Inspection section beginning on page 56.
WARNING