EverFocus ENDEAVOR 22HH1144 - Manual (Page 16)

7
1) Remote Control Receiver: Receiver for IR remote control
2) Channel keys 1~16: Press channel key (CH1~CH16) to display that channel in full screen view.
CH1~CH14 are analog video. CH15 and CH16 are HD-CCTV video.
3) Channel keys 1~8: Press channel key (CH1~CH8) to display that channel in full screen view.
CH1~CH14 are analog video.
4) DVD Eject: Press this button to eject the DVD.
5) View: Press this key to switch between 4x, PiP (Picture In Picture),full screen, 6x, 7x, 8x, 9x, 10x, 13x
and 16x.
6) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell time can be set in
“Display Setting” tab of the Menu.
7) Display: Press this key to switch display of channels and status bar.
8) Monitor: Switch between Main monitor and Call monitor (Function reserved).
9) Zoom: In full screen mode, 2x and 4x electronic zoom. Zoom screen can be moved through arrow keys.
Pressing the Menu/ESC key again switches the electronic zoom off.
10) Menu Navigation Keys: Instead of or in combination with a mouse, you can use these keys to change
the Menu settings.
11) Copy: Press this key to enter Copy Menu
12) JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast forward / fast
reverse playback.
JOG (inner wheel): In PAUSE mode, use the jog to move frame by frame. Within
menu functions, use the jog to adjust the values / parameters. Use Jog to highlight
individual cameras. Use either Shuttle or Jog to switch between MENU
parameters.
13) System LED
POWER: LED indicating power on
HDD: LED indicating HDD active
Alarm: LED indicating Alarm active
Network: LED for network traffic
Record: LED indicating Record active
Jog
Shuttle