8 monitor installation, 2 audio installation, Monitor installation – EverFocus ENDEAVOR 22HH1144 User Manual

Page 24: 2 audio, Installation

Advertising
background image

15

2.1.8 MONITOR INSTALLATION


The ENDEAVOR SD+HD DVR provides 2 main monitor outputs with identical functionality - VGA and HDMI.

Both outputs can be used simultaneously and deliver full HD output resolution (1920x1080, progressive, 60
Hz. vert., 68 KHz hor.).

Make sure that the connected monitor's specifications comply with these resolution requirements.


Please do not exceed the max. HDMI cable length of 15 m.
For cable length up to 3 m standard HDMI cables mostly work well, for longer distances (especially in the

15m range) please use only high quality HDMI cable.


2.2 AUDIO INSTALLATION


EDR HD-2H14 DVR provides 16 line level audio inputs and 2 line level audio outputs. EDR HD-4H4

provides 8 line level audio inputs and 2 line level audio outputs. The first 4 audio outputs are RCA
connectors, the rest are on DIN connectors.
Audio out 1 is for local audio output, whereas Audio out 2 is reserved for the audio transmitted from the
remote site back to the DVR.
ATTENTION: The direct connection of a non-amplified microphone is not supported (a microphone
amplifier is required). The audio output requires an amplifier to drive a speaker or headphones.
The installation must be connected with audio coax cable and RCA plugs.

AUDIO RECORDING FUNCTIONALITY:

Advertising