HEIDENHAIN iTNC 530 (340 49x-05) Cycle programming - Manual (Page 260)

260 Cycles: Coordinate Transformations
1
1
.1 F
undamentals
11.1 Fundamentals
Overview
Once a contour has been programmed, you can position it on the
workpiece at various locations and in different sizes through the use
of coordinate transformations. The TNC provides the following
coordinate transformation cycles:
Cycle Soft key Page
7 DATUM SHIFT
For shifting contours directly within the
program or from datum tables Page 262
247 DATUM SETTING
Datum setting during program run Page 269
8 MIRROR IMAGE
Mirroring contours Page 270
10 ROTATION
For rotating contours in the working
plane Page 272
11 SCALING FACTOR
For increasing or reducing the size of
contours Page 274
26 AXIS-SPECIFIC SCALING FACTOR
For increasing or reducing the size of
contours with scaling factors for each
axis Page 276
19 WORKING PLANE
Machining in tilted coordinate system on
machines with swivel heads and/or
rotary tables Page 278