HEIDENHAIN iTNC 530 (34049x-08) - Manual (Page 183)

HEIDENHAIN iTNC 530 183
5.2 T
ool data
DR2TABLE 3D ToolComp software option: Enter the name of the
compensation value table from which the TNC is to take the
angle-dependent delta radius values DR2 (see also "3-D tool radius
compensation depending on the tool’s contact angle (3D-
ToolComp software option)" on page 523)
Input range: Max. 16 characters without file extension
Compensation-value table?
LAST_USE Date and time that the tool was last inserted via TOOL CALL
Input range: Max. 16 characters, format specified internally:
Date = yyyy.mm.dd, time = hh.mm
Date/time of last tool call?
ACC Activate or deactivate active chatter control for the respective tool
(see also "Active Chatter Control (ACC; software option)" on page
445).
Input range: 0 (inactive) and 1 (active)
ACC status 1=active/0=inactive
Abbr. Inputs Dialog