HEIDENHAIN TNC 620 (340 56x-03) User Manual
Tnc 620
Advertising
Table of contents
Document Outline
- Controls of the TNC
- Keys on visual display unit
- Machine operating modes
- Programming modes
- Program/file management, TNC functions
- Navigation keys
- Potentiometer for feed rate and spindle speed
- Cycles, subprograms and program section repeats
- Tool functions
- Programming path movements
- Special functions
- Coordinate axes and numbers: Entering and editing
- About this Manual
- TNC Model, Software and Features
- New Functions of Software 340 56x-02
- Changed Functions of Software 340 56x-02
- New Functions of Software 340 56x-03
- Changed Functions of Software 340 56x-03
- First Steps with the TNC 620
- Introduction
- Programming: Fundamentals, File Management
- 3.1 Fundamentals
- 3.2 Creating and Writing Programs
- 3.3 File Management: Fundamentals
- 3.4 Working with the File Manager
- Directories
- Paths
- Overview: Functions of the file manager
- Calling the file manager
- Selecting drives, directories and files
- Creating a new directory
- Creating a new file
- Copying a single file
- Copying files into another directory
- Copying a table
- Copying a directory
- Choosing one of the last files selected
- Deleting a file
- Deleting a directory
- Marking files
- Renaming a file
- File sorting
- Additional functions
- Data transfer to or from an external data medium
- The TNC in a network
- USB devices on the TNC
- Programming: Programming Aids
- Programming: Tools
- 5.1 Entering Tool-Related Data
- 5.2 Tool Data
- Requirements for tool compensation
- Tool numbers and tool names
- Tool length L
- Tool radius R
- Delta values for lengths and radii
- Entering tool data into the program
- Entering tool data in the table
- Importing tool tables
- Pocket table for tool changer
- Calling tool data
- Tool preselection with tool tables
- Tool change
- Tool usage test
- 5.3 Tool Compensation
- Programming: Programming Contours
- 6.1 Tool Movements
- 6.2 Fundamentals of Path Functions
- 6.3 Contour Approach and Departure
- Overview: Types of paths for contour approach and departure
- Important positions for approach and departure
- Approaching on a straight line with tangential connection: APPR LT
- Approaching on a straight line perpendicular to the first contour point: APPR LN
- Approaching on a circular path with tangential connection: APPR CT
- Approaching on a circular arc with tangential connection from a straight line to the contour: APPR LCT
- Departing on a straight line with tangential connection: DEP LT
- Departing on a straight line perpendicular to the last contour point: DEP LN
- Departing on a circular path with tangential connection: DEP CT
- Departing on a circular arc tangentially connecting the contour and a straight line: DEP LCT
- 6.4 Path Contours—Cartesian Coordinates
- 6.5 Path Contours—Polar Coordinates
- 6.6 Path Contours—FK Free Contour Programming (Advanced Programming Features Software Option)
- Programming: Subprograms and Program Section Repeats
- Programming: Q Parameters
- 8.1 Principle and Overview
- 8.2 Part Families—Q Parameters in Place of Numerical Values
- 8.3 Describing Contours through Mathematical Operations
- 8.4 Trigonometric Functions
- 8.5 Circle Calculations
- 8.6 If-Then Decisions with Q Parameters
- 8.7 Checking and Changing Q Parameters
- 8.8 Additional Functions
- 8.9 Accessing Tables with SQL Commands
- 8.10 Entering Formulas Directly
- 8.11 String Parameters
- String processing functions
- Assigning string parameters
- Chain-linking string parameters
- Converting a numerical value to a string parameter
- Copying a substring from a string parameter
- Converting a string parameter to a numerical value
- Checking a string parameter
- Finding the length of a string parameter
- Comparing alphabetic priority
- Reading machine parameters
- 8.12 Preassigned Q Parameters
- Values from the PLC: Q100 to Q107
- Active tool radius: Q108
- Tool axis: Q109
- Spindle status: Q110
- Coolant on/off: Q111
- Overlap factor: Q112
- Unit of measurement for dimensions in the program: Q113
- Tool length: Q114
- Coordinates after probing during program run
- Deviation between actual value and nominal value during automatic tool measurement with the TT 130
- Tilting the working plane with mathematical angles: rotary axis coordinates calculated by the TNC
- Measurement results from touch probe cycles (see also User’s Manual for Touch Probe Cycles)
- 8.13 Programming Examples
- Programming: Miscellaneous Functions
- 9.1 Entering Miscellaneous Functions M and STOP
- 9.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant
- 9.3 Miscellaneous Functions for Coordinate Data
- 9.4 Miscellaneous Functions for Contouring Behavior
- Machining small contour steps: M97
- Machining open contour corners: M98
- Feed rate factor for plunging movements: M103
- Feed rate in millimeters per spindle revolution: M136
- Feed rate for circular arcs: M109/M110/M111
- Calculating the radius-compensated path in advance (LOOK AHEAD): M120 (Miscellaneous functions software option)
- Superimposing handwheel positioning during program run: M118 (Miscellaneous functions software option)
- Retraction from the contour in the tool-axis direction: M140
- Suppressing touch probe monitoring: M141
- Automatically retract tool from the contour at an NC stop: M148
- Programming: Special Functions
- Programming: Multiple Axis Machining
- 11.1 Functions for Multiple Axis Machining
- 11.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
- Introduction
- Define the PLANE function
- Position display
- Reset the PLANE function
- Defining the machining plane with spatial angles: PLANE SPATIAL
- Defining the machining plane with projection angles: PROJECTED PLANE
- Defining the machining plane with Euler angles: EULER PLANE
- Defining the working plane with two vectors: VECTOR PLANE
- Defining the working plane via three points: PLANE POINTS
- Defining the machining plane with a single, incremental spatial angle: PLANE RELATIVE
- Tilting the working plane through axis angle: PLANE AXIAL (FCL 3 function)
- Specifying the positioning behavior of the PLANE function
- 11.3 Inclined-Tool Machining in a Tilted Plane (Software Option 2)
- 11.4 Miscellaneous Functions for Rotary Axes
- Feed rate in mm/min on rotary axes A, B, C: M116 (software option 1)
- Shorter-path traverse of rotary axes: M126
- Reducing display of a rotary axis to a value less than 360°: M94
- Maintaining the position of the tool tip when positioning with tilted axes (TCPM): M128 (software option 2)
- Selecting tilting axes: M138
- Compensating the machine’s kinematics configuration for ACTUAL/NOMINAL positions at end of block: M144 (software option 2)
- 11.5 TCPM FUNCTION (Software Option 2)
- 11.6 Three-Dimensional Tool Compensation (Software Option 2)
- Programming: Pallet Editor
- Manual Operation and Setup
- 13.1 Switch-On, Switch-Off
- 13.2 Moving the Machine Axes
- 13.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M
- 13.4 Datum Setting without a 3-D Touch Probe
- 13.5 Using 3-D Touch Probes (Touch Probe Function Software Option)
- 13.6 Calibrating 3-D Touch Probes (Touch Probe Function Software Option)
- 13.7 Compensating Workpiece Misalignment with 3-D Touch Probe (Touch Probe Function Software Option)
- 13.8 Datum Setting with 3-D Touch Probe (Touch Probe Function Software Option)
- 13.9 Tilting the Working Plane (Software Option 1)
- Positioning with Manual Data Input
- Test Run and Program Run
- 15.1 Graphics (Advanced Graphic Features Software Option)
- 15.2 Showing the Workpiece Blank in the Working Space (Advanced Graphic Features Software Option)
- 15.3 Functions for Program Display
- 15.4 Test Run
- 15.5 Program Run
- 15.6 Automatic Program Start
- 15.7 Optional block skip
- 15.8 Optional Program-Run Interruption
- MOD Functions
- 16.1 Selecting MOD Functions
- 16.2 Software Numbers
- 16.3 Entering Code Numbers
- 16.4 Setting the Data Interfaces
- Serial interfaces on the TNC 620
- Application
- Setting the RS-232 interface
- Setting the baud rate (baudRate)
- Setting the protocol (protocol)
- Setting the data bits (dataBits)
- Parity check (parity)
- Setting the stop bits (stopBits)
- Setting the handshake (flowControl)
- Settings for data transfer with the TNCserver PC software
- Setting the operating mode of the external device (fileSystem)
- Software for data transfer
- 16.5 Ethernet Interface
- 16.6 Position Display Types
- 16.7 Unit of Measurement
- 16.8 Displaying Operating Times
- Tables and Overviews
- 17.1 Machine-Specific User Parameters
- 17.2 Pin Layouts and Connecting Cables for the Data Interfaces
- 17.3 Technical Information
- 17.4 Exchanging the Buffer Battery
- Overview Tables
- Comparison: Functions of the TNC 620 and the iTNC 530
- Comparison: Specifications
- Comparison: Data interfaces
- Comparison: Accessories
- Comparison: PC software
- Comparison: Machine-specific functions
- Comparison: User functions
- Comparison: Cycles
- Comparison: Miscellaneous functions
- Comparison: Touch probe cycles in the Manual Operation and El. Handwheel modes
- Comparison: Touch probe cycles for automatic workpiece inspection
- Comparison: Differences in programming
- Comparison: Differences in Test Run, functionality
- Comparison: Differences in Test Run, operation
- Comparison: Differences in Manual Operation, functionality
- Comparison: Differences in Manual Operation, operation
- Comparison: Differences in Program Run, operation
- Comparison: Differences in Program Run, traverse movements
- Comparison: Differences in MDI operation
- Comparison: Differences in programming station