Yaskawa Portable Control Display Unit User Manual
Page 16
4
PARAMETER MENU
10
Parameter (PRM) Menu
01/22/96
PARAMETER
(PRM) MENU
Viewing a
Parameter
The Parameter menu contains the settable
parameters used by the drive. This menu is
used to view and optionally modify those
parameters. Function codes # 001 through
# 299 are reserved for settable parameters.
These function codes are PAC diagram
dependent, and the parameters assigned to
these codes are therefore defined by the
user.
Example:
Assume the operator wants to view the
current value for the TACH PULSES/REV.
For this example the function number will
be # 010. The operator has two ways of
selecting the appropriate function:
1. Scrolling
•
Press the PRM key followed by
enough INC or DEC key repetitions
until the desired item shows in the
display:
OR
2. Direct Access
•
Enter the appropriate function code
number (for this example it will be
010) from the top level of any menu
display. The PCDU display will
change to:
Enter Function
Number : 010
TACH PULSES/REV
2500. P/R P010