Yaskawa Portable Control Display Unit - Manual (Page 26)

5 FAULT MENU
20 Clearing Faults
01/22/96
Clearing All Faults
in the List
There may be up to 16 faults present in the
Fault List. It is possible to clear the entire
list or selectively remove certain faults
from the list.
The procedure for clearing the entire Fault
List is as follows:
• Select Funtion # 000 (see
“Displaying the Fault Llist”).
• Press the INC key until the PCDU
displays:
• Press the CLR key. The red FAULT
LED on the drive front of the drive
will turn off, and the display on the
drive front panel will change back to
its previous display prior to showing
the first fault. The PCDU returns to
its top level display:
DISPLAY FAULTS
(press ENT) F000
TOP OF FLT LIST
CLR clears all