Yaskawa Sigma-5 User Manual: Design and Maintenance - Linear Motors - Manual (Page 36)

1 Outline
1.6.2 Connecting to SGDV-†††AE5A SERVOPACK
1-16
(2) Using a Single-phase, 200-V Power Supply
The Σ-V Series SERVOPACK for a 200-V power supply input has input specifications for a three-phase power supply, but
some models can also be used with a single-phase 200-V power supply. For details, refer to 3.1.4 Using the SERVOPACK
with Single-phase, 200-V Power Input.
∗ Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.7 Regenerative Resistors Connec-
tions.
Regenerative
resistor*
Noise filter
Molded-case
circuit breaker
(MCCB)
I/O signal cable
SGDV- AE5A
SERVOPACK
Power supply
Single-phase 200 VAC
R T
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Used to eliminate
external noise from
the power line.
Magnetic contactor
Turns the servo ON
and OFF.
Install a surge
absorber. Personal
computer
Cable for connecting
personal computer
Digital
operator
When not using the safety function,
use the SERVOPACK with the
safety function’s jumper connector
(JZSP-CVH05-E provided as an
accessory) inserted.
When using the safety function.
insert a connection cable specially
for the safety function.
Safety function
devices
Cable for connecting
digital operator
External device
such as external
LED indicator
Command Option
Module
Main circuit cable
for linear servomotor
Serial converter unit
Cable for connecting
serial converter unit
Linear servomotor
with core
Linear scale
(not included)
Cable for connecting
hall sensor
Cable for connecting
linear scale