Figure 5-44 snat rule configuration, Snat configuration rule – Hongdian H7921/H7920 Basic 3G/4G Router User Manual
Page 74
7 FAQ
H792x 3G/4G Router
7 -40
(2014-05-28)
Parameter
Details
Operation
Original port
The port of destination
address need to be replaced
Value area: 1~65535
Mapping address
The new source address
after destination address is
replaced
e.g. 192.168.8.1
Mapping port
The port of destination
address after is replaced
Value area :1~65535
Step 7 Single click “save” icon to finish.
---END
SNAT configuration rule
SNAT is the source address translation, and its role is to translate source address of IP packets
into another address.
Step 3 Log-on WEB GUI of H792x 3G/4G router.
Step 4 Click “Forward > NAT” to open “NAT” tab.
Step 5 NAT Type select “SNAT”, Configuration interface as shown in Figure 5-47.
Figure 5-44
SNAT rule configuration
Step 6 Configure SNAT rule parameter,.
Parameter instruction as Table 5-22