Hongdian H7921/H7920 Basic 3G/4G Router - Manual (Page 85)

H92x 3G/4G Router 7 FAQ
Version (2014-05-28) 7 -51
Parameter Details Operation
Redistribute
Static Enable or disable Redistribute Static Click the button to select

Enable
 Disable
Redistribute
Kernel Enable or disable Redistribute Kernel Click the button to select

Enable
 Disable
Step 5 Click “Add” to add a new OSPF route, configuration interface as Figure 5-56.
Figure 5-53 OSPF route configuration interface
Step 6 Configure RIP route parameter instruction, as Table 5-29.
Table 5-28 OSPF route parameter instruction
Parameter Details Option
Add Type Add the type of OSPF route Click the button to select Add Type
 Network

Neighbor
 Interface
 When Add Type is “Network”,
Network Set the network address as
ospf sending address Manual input
Format1: A.B.C.D/Mask
AS Number Used to identify the network
(only the routers with the
same domain address can
exchange routing
information) Manual input
Value area:[0,65535]
When Add Type is “Neighbor”,