iSys V24 Direct Thermal Printer - Manual (Page 5)

5
Location of the V24 Plotter
Properly locating the V24 will help to enhance its performance and extend its useful life.
The plotter has a wide operating range and functions well under various conditions. For
best performance, we recommend the following conditions:
• Place in a well ventilated, stable environment free from abrupt temperature or
humidity changes.
---Temperature – 10 to 40 deg. Celsius (50 to 104 deg. Full)
---Relative Humidity 40% and 70% (non-condensing)
• Place on a firm, flat surface.
• Avoid sources of direct heat and sunlight.
• Allow a minimum of 20 cm (9 in.) side clearance for proper airflow.
WARNING: The V24 plotter weighs approximately 28 kg. (60 lb.). Use appropriate care
when lifting or moving the unit.
CAUTION: Do not touch the thermal print head. Natural body oils can damage it.
Scratches in the print head will affect image quality. Print head damage caused by users
is not covered by warranty.
CAUTION: Do not block the air vents. Proper airflow helps maintain operating
temperature.
Overview