Bang & Olufsen BeoSound 5 User Guide - Manual (Page 13)

13
The maintenance menu
From the menu, you can activate
the clean-up function to delete
unwanted tracks from the
internal hard disk. The clean-up
function is only available when
the internal hard disk is selected
as music storage.
Note that even though you
delete items from the internal
hard disk, they re-appear if you
transfer them to the hard disk
again.
You can also update the product
software and read about the
latest software in your product.
The advanced menu SUBMIT LOGS TO
BANG & OLUFSEN collects the
products error logs and sends them
compressed to Bang & Olufsen over
the Internet. These can only be
submitted successfully when
requested by technician.
Clean-up function
You use the clean-up function to delete
tracks, albums or artists permanently
from the internal hard disk. To use the
clean-up function, you must switch it on
while N.Music is active.
Switch clean-up on …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and
press GO.
> Use the pointer to highlight
MAINTENANCE.
> Turn the wheel to select CLEAN-UP, and
press GO.
> Turn the wheel to select ON, and press
GO.
Now when you highlight an item in any list,
for example Artist view for N.Music, you get
the option to delete items, when you press
and hold the GO button.
Manual software update
You can choose to update software
manually or set the system to update
software automatically. The system
restarts when you update software.
Update software manually …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS and
press GO.
> Use the pointer to highlight
MAINTENANCE.
> Turn the wheel to select UPDATE
SOFTWARE and press GO.
> The display shows the Bang & Olufsen
logo and the message: ‘Checking for new
software - Press GO to cancel’ appears.
> When the software update is completed,
the message ‘Download 100% complete‘
appears on the display. The system shuts
down and restarts. If no new software is
available, the message ‘No new software
update available’ appears on the display.
NOTE! Updating software manually is a one
time operation that does not affect the
setting ‘AUTOMATIC SOFTWARE UPDATE’.
NOTE! Playback is affected when updating
software manually.