Bang & Olufsen BeoSound 5 User Guide - Manual (Page 20)

20
Host name, IP address and client password
In some cases you need information
about the host name, IP address and
client password of your BeoSound 5
setup, for example, if your router has
been disconnected.
The information can be looked up in the
NETWORK INFO menu, but if you want
to change your password or host name,
you must enter the ‘advanced’ menu;
NETWORK SETTINGS. If you change the
host name, the system restarts.
To change network settings …
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS.
> Press twice and press GO.
> Turn the wheel to select NETWORK
SETTINGS and press GO.
> Bring up the setting you wish to change
and press GO.
> Change the settings you want, select
STORE and press GO to save your changes.
>> Network setup
CLIENT PASSWORD
HOST NAME
LOCATION