Bang & Olufsen BEOCOM 2500 - Manual (Page 34)

MENU *
<
SETUP MENU >
SETUP MENU
< CALL WAITING >
SWITCHBOARD
If your BeoCom 2500 is connected to a
switchboard you have to store the
switchboard code in order to ensure
correct function of the operator code.
As well, it is often necessary to enter a
pause between the switchboard code and
the telephone number.
BeoCom 2500 inserts this pause auto-
matically when it is once stored into the
telephone together with the switchboard
code.
If the R-button is used for recalls sub-
sequent key entries will not be stored for
redialing.
SWITCHBOARD
<
NO >
SWITCHBOARD
CODE:_
PAUSE
<
WAIT >
STORED
SWITCHBOARD
X
TO STORE THE SWITCHBOARD CODE
Press
Menu,
Press Enter
Press
>
until SWITCHBOARD is shown in the display.
Press Enter
Press
< >
until YES is shown in the display.
Press Enter
Enter the code
Press Enter
Press
< >
to select the pause required.*)
Press Enter
*) The pause between the
prefix and the telephone
number can be set from one
to twelve seconds or you can
enter a stop (WAIT or NO
DELAY).