Larco Guardian II - Manual (Page 8)

Access Controller
Installation Guide
Page 8 of 15
Wiring diagrams
Power Fail - LOCK
Strike powered using same
voltage source as the incoming
power.
Notes:
1. Maximum AC voltage input: 12vRMS
2. Important – Do not connect the fly back diode on AC applications.
3. Connections are shown when using a DC powered strike or magnetic latch.
4. All long dashed lines denote any optional or customer supplied items.
Power Fail - UNLOCK
Strike powered using same voltage
source as the incoming power.
Notes:
1. Maximum AC voltage input: 12vRMS
2. Important – Do not connect the fly back diode on AC applications.
3. Connections are shown when using a DC powered strike or magnetic latch.
4. All long dashed lines denote any optional or customer supplied items.