LinPlug MorphoX - Manual (Page 30)

LFO 3
The LFO 3 is a host synced LFO. It
synchronises both with tempo as well
as song position, so the start of a bar in
the song will also be the start of a cycle
of this LFO. This only works for speeds
equal or faster than 1/1, if you for
example choose 4/1, of course the LFO
can only starts its cycle every 4
th bar.
The first parameter selects the Waveform, while the second selects the
Speed (in note's length).
When choosing Retrigger, the LFO is only tempos-synced to the host/song
(but not position-synced), it will start its cycle with each first note after a
pause.
Stair LFO
The Stair LFO is a globally running LFO with two controls, the lower one is
setting the speed at which it proceeds from one step of the stair waveform
to the next.
The upper parameter defines how
many levels the stair is made of, and
thus how long it takes for a complete
cycle. As you can see from the
examples on the next page, there is a
fixed correlation between the amount of
levels and the length of a complete
cycle.
MorphoX user manual 1.1.0 page 30