Emerson SMARTSET CKD5809C - Manual (Page 22)

2 1
4.) Press the PLAY/PAUSE button on the top panel.
5.) The display briefly shows “Cd” and then two dashes “– –” will appear as the
player reads the disc.
After a few seconds the display will show the total number of tracks on the
disc, then playback begins on Track 1.
After 5 seconds of playback the display
will return to the correct time but the
small “CD” and “PLAY” indicators
remain in the display to indicate that a
CD is playing.
Note: If your disc is dirty, heavily scratched, or otherwise unreadable the
display will continue to show two dashes “– –” but playback will not begin.
6.) Adjust the VOLUME control to the desired level.
7.) Playback will continue until the last track has played, then the player stops, the
display briefly shows the total number of tracks, then returns to the correct
time again. To stop playback before the disc ends press the STOP button at
any time.
CKD5809_021705.p65 17/2/2005, 14:58 21