Emerson SMARTSET CKD5809C - Manual (Page 27)

2 6
Alarm Operation
The dual alarms in this system give you the option of waking to the radio, an
electronic buzzer tone, or your favorite track on your favorite CD.
You may also program one or both of the alarms for weekdays only, weekends
only, or everyday operation.
Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and
adjust if necessary.
Refer to “Adjusting The Wake Up Times” and “Selecting The Alarm Mode” on
pages 14, 15.
Wake To Radio
1.) Tune to the station that you want to wake you up, adjust the VOLUME control
to the desired level, and then shut the system ‘Off’.
2.) Slide the ALARM 1 and/or ALARM 2 selector switches, located on the left side
panel to the “RADIO” position.
The AL 1 and/or AL 2 indicators will
appear in the main display to confirm
that the alarms are ‘On’.
3.) At the selected wake-up time the radio
will turn on to the selected station. It will
play for one hour and then shut off
automatically and reset itself for the
following day.
To shut the radio off sooner you can press either the POWER ON/OFF button
or the appropriate ALM 1 or ALM 2 button on the top panel.
CKD5809_021705.p65 17/2/2005, 14:58 26