Emerson SMARTSET CKD5809C - Manual (Page 29)

2 8
Wake To CD
1.) Load the desired CD in the player, start playback and adjust the VOLUME
control to the desired wake up level. Then shut the power ‘Off’.
2.) Slide the ALARM 1 and/or ALARM 2 selector switches, located on the left side
panel to the “CD” position. The AL 1 and/or AL 2 indicators will appear in the
main display to confirm that the alarms are ‘On’.
3.) If you wish to select a specific track to wake you up, depress and hold the
WAKE UP TRACK button on the top panel and press the or buttons to
select the desired track.
When the desired track number
appears on the display release all the
buttons.
Note: If you do not select a specific track for wake-up, Track 1 is selected
automatically. The wake-up track number you selected remains in the
memory until you change it by selecting a different track, or the CD door is
opened.
4.) At the selected wake-up time the CD
player will turn on to your selected track
or to Track 1 if no track was selected.
It will play for one hour or until the end of the disc, whichever comes first, and
then shut off automatically and reset itself for the following day.
To shut the CD player off sooner you can press the POWER ON/OFF button or
the appropriate ALM 1 or ALM 2 buttons on the top panel.
To Cancel The Alarms
To cancel the alarms completely so they do not come on at all, slide the appropriate
ALARM 1 and/or ALARM 2 selector switches to the ‘OFF’ positions.
CKD5809_021705.p65 17/2/2005, 14:58 28