Sleep timer – Emerson SMARTSET CKD5809C User Manual

Page 31

Advertising
background image

3 0

SLEEP Timer

The Sleep Timer allows you to operate the radio or CD player for up to 99 minutes

while you are falling asleep and then shuts the power off automatically.

1.) Turn the system ‘On’ and operate the radio or CD player as usual.

Adjust the VOLUME control to the desired level for falling asleep, but remember

that the level you set for falling asleep is that same level that you will hear in the

morning if you are waking to radio or CD.

2.) Press the SLEEP button on the top panel.

The display will show “L:30” and the SLP

(Sleep) indicator will appear.

The radio or CD player will operate for 30 minutes and then shut off

automatically.

3.) To change the amount of Sleep time depress and hold the SLEEP button and

press the

or

buttons to decrease or increase the amount of sleep time

from 2 minutes to 99 minutes.

Note: When you change the Sleep timer from the original 30-minute default

setting your new setting becomes the new default setting.

For example if you change the Sleep timer setting from 30 minutes to 45

minutes, 45 minutes becomes the new default Sleep timer setting until you

change it again.

4.) When the Sleep timer counts down to “00” the power shuts off automatically.

Note: If you set the Sleep timer for 60 minutes but you are playing a CD

that is only 45 minutes long, the music will stop after 45 minutes but the

power will remain ‘On’ until the Sleep timer counts down to “00”.

CKD5809_021705.p65

17/2/2005, 14:58

30

Advertising