Eagle Electronics EVR-150 - Manual (Page 36)

36 EAGLE - EVR-150 Installation and Operation Instructions
5-2-7 Call using the Call Log (CALL LOG)
The Call Log contains the contact details for the 20 most recent incoming calls, so that you
call any of them again quickly.
1. Press CALL MENU to enter DSC mode, then select CALL LOG.
Scroll down to the desired contact details.
The radio displays the contact details for the most recent incoming call as the first entry
(01) in the call log. In the example, the contact details for the 11th most recent call are
displayed.
2. Press ENT to confirm the call back, then set the working channel and press ENT to send
the call. Continue as explained in Section 5-2-1.
5-2-8 Call using the Distress Log (DIST LOG)
The Distress Log contains the Distress Log data for the 10 most recent relayed Distress Calls,
so that you can call any of them quickly. Always try to make voice contact on CH16 first, as
follows:
1. Press CALL/MENU to enter DSC mode, then select DIST LOG.
2. The most recently received Distress Call Is the first entry (01) in the Distress Log. Select
the entry that you want to call and press ENT.
BOBBY D
INDIVIDUAL
ROUTINE
>SEND?
DSC CALL
GROUP
ALL SHIPS
>CALL LOG
BOBBY D
INDIVIDUAL
ROUTINE
10:45PM LOC
BOBBY D
>CALL BACK
DELETE
BOBBY D
INDIVIDUAL
ROUTINE
>SET CHANNEL
DSC CALL
ALL SHIPS
CALL LOG
>DIST LOG
REBECCA T
>CALL BACK
DELETE
DISTRESS
RELAY
PIRACY
987654321
02 10:03 UTC
82º50. N
27º45. W
REBECCA T
INDIVIDUAL
ROUTINE
>SET CHANNEL
REBECCA T
INDIVIDUAL
ROUTINE
>SEND?