Easy PocketNAV.com 4 - Manual (Page 107)

User's manual OnCourse Navigator | 4
Appendix - 105 -
7.1.7 Logbook
Logbook On the L
OGBOOK
screen, determine whether the logbook is to be
started automatically at the beginning of navigation (Yes) or not
(No).
Tap the Start automatically on available GPS signal button
to toggle between Yes and No.
Independent from the settings made here, you may at any time
start or stop the logbook via the
icon.
7.1.8 Keypad
Keypads On the K
EYPAD
screen, you may configure the hardware keys of
your Pocket PC to execute the “up”, “down”, “left”, “right”,
“enter” and “return” actions. This enables convenient and easy
operation.
When you quit the navigation software, the keys will have their
standard functionality.
Tap the Key assignment button to check or to modify the
configuration.
7.1.9 Itinerary
Proceeding
automatically to the
next stage point… On the I
TINERARY
screen, determine whether you want to
navigate automatically to the next stage point after having
reached a stage point (Yes) or not (No).
Tap the Proceed automatically to next destination button to
toggle between Yes and No.
If you do not proceed automatically, you may proceed as follows:
On the map in navigation mode, tap the Additional functions
icon.
Select Next route point and tap OK.
7.1.10 Format
Units On the F ORMAT screen, determine which units are to be used for
time and distance indications.
Element Signification
Time Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Distance Tap the Distance field to toggle between
kilometers or miles distance units.