Easy PocketNAV.com 4 - Manual (Page 39)

User's manual OnCourse Navigator | 4
Operating the navigation software - 37 -
3.3.3 Selecting destinations from the Outlook contacts list
Using Outlook
contacts as
destination…
Any address from the Outlook contacts list on your Pocket PC
may be used as destination for navigation or itinerary planning
purposes.
In order to identify an address clearly and without ambiguity,
town, postcode, street, and house number should be indicated.
Notice: Only contacts the address of which is covered by the
currently loaded map may be used for navigation or itinerary
planning purposes.
Incomplete address If an address cannot be identified without ambiguity e.g. because
there are two towns with the same name on the map, OnCourse
Navigator lists them all, indicating their postcodes and districts.
Select the respective town and tap OK.
If the town has been found but the street of the contact is not
indicated, you will be guided to the center of this town.
To avoid problems, the addresses from your Outlook contacts list
should be complete.
Selecting a contact’s
address…
1. On the D ESTINATION screen, tap the Contacts button.
Your Pocket PC’s contacts list opens.
2. Tap the respective contact’s entry and hold until you get the
context menu:
3. Tap OnCourse Navigator.