Easy PocketNAV.com 4 - Manual (Page 15)

User's manual OnCourse Navigator | 4
Installation and quick-start guide - 13 -
2.2.1 Software installation on your PC and on your
Pocket PC (Case A)
Survey You must install the software on your PC and on your Pocket PC
before you can use your navigation system.
At the beginning of the installation process, the base map (e.g. of
USA and Canada) and the MapExport software (which is
designed for defining and exporting your own areas of the base
map and for transferring them to your Pocket PC) will be installed
on your PC. At the end of the same process, the OnCourse
Navigator navigation software will be installed on your Pocket
PC.
Installing the
software... 1. Establish an ActiveSync connection between your PC and
your Pocket PC (for details, please refer to the manual of your
Pocket PC).
2. Insert the OnCourse Navigator CD-ROM 1 into your CD-
ROM drive.
The installation process starts automatically.
Notice: If the installation process does not start
automatically, open the Windows Explorer, double-click the
entry of your CD-ROM drive and double-click Setup.exe.
3. Follow the instructions of the installation software.
The navigation software will be installed on your Pocket PC
when the installation process on your PC is finished.