Easy PocketNAV.com 4 - Manual (Page 72)

User's manual OnCourse Navigator | 4
Additional software: MapExport - 70 -
5.1 Functionality of MapExport
5.1.1 Map export and transfer
Notice: You do not dispose of MapExport unless you have
purchased the 4-CD-version of OnCourse Navigator and
installed the software.
Survey The transfer of maps is divided into two independent steps:
Ù Map export:
The generation of determined map segments and their
storage on the hard disk of your PC.
For details, please refer to “Corridor surrounding an itinerary”,
page 80 and to “Area”, page 89.
Ù Map transfer:
Transfer of exported maps from your PC’s hard disk to your
Pocket PC.
There is no need to execute these two steps one after the other.
As exported maps are stored on your PC’s hard disk they may be
transferred to your Pocket PC at any moment.
Duration of both
map export and map
transfer
Depending of the quantity of data and the performance of your
PC, the exportation of a map segment may take several hours. It
is the same with the transfer of this segment to your Pocket PC
via an ActiveSync connection. We recommend using a card
reader to transmit large map segments.
5.1.2 Transfer of Standard map extracts
Transfer of Standard
map extracts If you have obtained two CDs containing ready-to-use map
segments with your navigation software, you may, with
MapExport, directly transmit them to your Pocket PC or to a
memory card.
For details, please refer to “Transferring segments of the base
map”, page 93.