Extron electronic Digital Video Transmitter and Receiver DVI 201 Rx - Manual (Page 27)

DVI 201 Tx/Rx • Reference Information
Reference Information, cont’d
DVI 201 Tx/Rx • Reference Information A-4 A-5
Impedance
DVI 201 A D Tx .................. 50 ohms unbalanced, 100 ohms balanced
DVI 201 A D Rx .................. 50 ohms unbalanced
Maximum level (Hi-Z)
DVI 201 A D Tx .................. >+16 dBu, balanced or unbalanced at
1% THD+N
DVI 201 A D Rx .................. >+9.8 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)
DVI 201 A D Tx .................. >+9 dBm, balanced or unbalanced at
1% THD+N
DVI 201 A D Rx .................. >+6.8 dBm, unbalanced at 1% THD+N
Control/remote — external device (pass-through)
Serial control port input
Transmitter ......................... RS-232 via (1) 3.5 mm, 3 pole captive screw
connector
Receiver .............................. 1 set of proprietary signals on a female
RJ-45 jack
Serial control port output
Transmitter ......................... 1 set of proprietary signals on a female
RJ-45 jack
Receiver .............................. RS-232 via a 3.5 mm, 3 pole captive screw
connector
N Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations . Captive screw connectors: 1 = TX, 2 = RX,
3 = GND
General
External power supply ................. 100 VAC to 240 VAC, 50/60 Hz, 6 W max.,
external; to 12 VDC, 1 A, regulated
Power input requirements ........... 12 VDC, 0.4 A for both transmitter and
receiver
N Each transmitter or receiver can be powered either locally by an external
power supply or remotely by receiver or transmitter on the other end of
the CAT 5/5e/6/7 cable.
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling ........................................... Convection, no vents
Mounting
Rack mount ........................ Yes, with optional 1U, 9.5" deep rack
shelf (RSU 129, #60-190-01; RSB 129,
60-604-01); 1U, 6" deep rack shelf (RSU
126, #60-190-10; RSB 126 60-604-10); or
VersaTools
® 1U, 3.5" deep rack shelf
(RSF 123, #60-190-20; RSB 123, 60-604-20)
Furniture mount ................ Yes, with optional MBD 129 Through-Desk
Mounting Kit, #70-077-02
Pole mount ......................... Yes, with optional PMK 250 mounting kit,
#70-526-02 or -03
Enclosure type ............................... Metal
Enclosure dimensions
DVI 201 Tx/Rx................... 1.0" H x 4.3" W x 3.0" D
(quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
DVI 201 A D Tx/Rx
Faceplate ..................... 2.6" H* x 1.3" W x 0.1" D
(6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang Decora
faceplate.)
*Height is 3.8" [9.7 cm] including
mounting tabs.
Buffer ........................... 2.7" H x 1.8" W x 0.75" D
(6.9 cm H x 4.6 cm W x 1.9 cm D)
(Depth excludes connectors.)
Product weight .............................. 0.5 lbs (0.3 kg)
Shipping weight ............................ 3 lbs (2 kg)
Vibration ......................................... ISTA 1A in carton
(International Safe Transit Association)
Listings............................................ UL, CUL
Compliances ................................... CE, FCC Class A**, VCCI, AS/NZS, ICES
MTBF ............................................... 30,000 hours
Warranty ......................................... 3 years parts and labor
N **FCC testing is conducted with STP (shielded twisted pair) cable.
N All nominal levels are at ±10%.
N Specifications are subject to change without notice.