Operation – Auriol Z31130 User Manual
Page 21
21
GB
Operation
Setting the 12 / 24 hour mode / °C / °F / time zone /
time / date / language manually
The reception of DCF radio signal where the weather station has been positioned may
become degraded or interrupted. If this happens you can set the device manually.
Follow these steps:
1. Press and hold down the MODE button
34
for about 3 seconds. The 12 / 24 hour
mode blinks in the display. Press the + or – button
35
,
36
to set the desired value.
Note: The AM symbol in the time display
7
stands for before noon in the
12 hour mode. The PM symbol in the time display stands for after noon in
12 hour mode.
2. Confirm your setting by pressing the MODE button. The temperature indicator
flashes in the display. Press the + or – button to set the desired value.
3. Confirm your setting by pressing the MODE button. The time zone indicator
flashes in the display. Press the + or – button to set the desired value (-2 to +2).
Note: The standard setting for the time zone is GMT+1. Set the weather station
to correspond to your time zone.
4. Confirm your setting by pressing the MODE button. The hour value of the time
display flashes. Press the + or – button to set the desired value.
Tip: Hold the + or – button pressed down. This will speed up the process of
setting the values. You can also use this fast setting option for subsequent settings.
If you do not press any button for 20 seconds, the LCD automatically reverts to
the standard display.
Operation