Operation, Temperature and frost alarm – Auriol Z31130 User Manual
Page 42
42 GB
Operation
Operation
Temperature and frost alarm
Press the – button
36
to get top the temperature alarm mode.
Hold the – button down for 3 seconds. The maximum temperature display
blinks. Press the + or – button to set the values.
Press the MODE button
34
to confirm your setting. The minimum temperature
display blinks. Press the + or – button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature
and frost alarm
If more than one outdoor sensor is activated, press the channel button
37
to
select one.
Press the – button
36
repeatedly to activate the temperature and frost alarms.
If the frost alarm alarm is activated, the corresponding symbol
23
appears next to
the outdoor temperature. The alarm signal sounds at –1 °C to + 3 °C.
If the temperature alarm is activated, the corresponding symbol appears next to the
outdoor temperature. The alarm signal sounds at the set values.
If the temperature and frost alarm are activated, both symbols appear in the display.