Auriol Z31130 - Manual (Page 23)

23 GB
Operation
4. Confirm your setting by pressing the MODE button. The minutes display flashes.
Repeat step 3 to set the minutes.
5. Confirm your setting by pressing the MODE button.
Tip: Hold the + or – button pressed down. This will speed up the process of
setting the values. You can also use this fast setting option for subsequent settings.
If you do not press any button for 20 seconds, the LCD automatically reverts to
the standard display.
Note: You can set two different alarms separately.
6. Press the MODE button twice briefly if the weather station is in time display 7
mode. Press the MODE button once briefly if the weather station is in ALARM 1
mode. This brings you now to ALARM 2 mode.
7. Repeat steps 2–5 to set the value for ALARM 2.
Activating / deactivating the alarm function
1. Briefly press the MODE button 34 briefly once or twice to reach ALARM 1 or
ALARM 2 mode.
2. Press the + button 35 . The ALARM 1 symbol 3 or ALARM 2 symbol 8 appears
in the LC display. The alarm has been activated.
3. Press the button + again. The ALARM 1 or ALARM 2 symbol in the LC display
goes out. The alarm has been deactivated.
Operation