Auriol Z29962A - Manual (Page 83)

85 GB/MT
© Setting up the weather station
˽
Place the stand 22 on the underside of the
weather station.
˽
Place the weather station on a level surface.
© Operation
Reception of the DCF radio signal may be disrupted
or interrupted at the location of the weather station.
In this case you are able to set the instrument
manually.
© Setting the time / date manually
1. Press and hold the CLOCK button 14 for approx.
3 seconds. The hours on the time display 9
begin to flash.
2. Press the ADJUST button 12 to set the required
number.
Tip: keep the ADJUST button 12 pressed for
faster time setting. You can also use this option
for the subsequent settings.
If no button is pressed in the space of approx.
1 minute, the LCD automatically returns to the
standard display.
3. Press the CLOCK button 14 to confirm your
entry. The minutes on the time display 9 start
to flash.
4. Repeat steps 2 and 3 to set the minutes, seconds,
year 17 and date 8 (month and day).
Note: the seconds display can only be reset
to 00.
5. The LCD returns to the standard display after
you have made the settings.
64089_aur_Wetterstation_Content_LB5.indd 85 03.03.11 11:07