Auriol Z29962A - Manual (Page 84)

86 GB/MT
© Displaying DST summertime
Summertime is automatically displayed on the LCD
by the
s
icon 16 . The DCF radio signal indicates
to the clock whether or not it is summertime.
© Setting the alarm
˽
Press and hold the ALARM button 13 for approx.
3 seconds.
Note: if you have already set an alarm, the
set alarm time is displayed on the LCD together
with AL. Otherwise 0:00 and AL are displayed.
˽
Press the ALARM button 13 briefly. The hours
start to flash.
˽
Press the ADJUST button 12 to set the required
number.
˽
Press the ALARM button 13 to confirm your
entry. The minutes start to flash.
˽
Press the ADJUST button 12 to set the required
number.
˽
Press the ALARM button, 13 to confirm your
entry.
˽
The LCD returns to the standard display (Time 9 ).
© Switching the alarm on / off
˽
Press and hold the ALARM button 13 for approx.
3 seconds. The set alarm time appears on the LCD.
˽
Press the ADJUST button 12 to switch the alarm
on or off.
Note: when the alarm is switched on, is
displayed above AL.
Note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
˽
The alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
64089_aur_Wetterstation_Content_LB5.indd 86 03.03.11 11:07