Extron electronic Multi-Rate SDI Fiber Optic Transceiver FOX HD-SDI - Manual (Page 18)

FOX HD-SDI • Reference Information
Reference Information
FOX HD-SDI • Reference Information A-2 A-3
Specifications
N The FOX HD-SDI is a transceiver that can function as a
transmitter and/or as a receiver. Two units are required for a
transmitter-receiver system with one fiber optic cable linking
the two units. The FOX HD-SDI is available in single mode or
multimode versions.
N These transceivers are class 1 laser products. They meet the
safety regulations of IEC-60825, FDA 21, CFR 1040.10, and
FDA 21 CFR 1040.11.
Optical fiber interconnection between transmitter and
receiver
Number/type ................................ 1 fiber optic
N Only one fiber is required to transmit video and embedded audio
and unidirectional data.
Connectors ..................................... 1 LC connector
Operating distance ........................ 30 km (18.75 miles) with singlemode (SM)
cables with a FOX HD-SDI SM
500 m (1640’) with multimode (MM)
cables with a FOX HD-SDI MM
N Operating distance is approximate. These are typical
distances. The maximum distance may be greater than these
typical numbers depending on factors such as fiber type, fiber
bandwidth, connector splicing, losses, modal or chromatic
dispersion, environmental factors, and kinks.
Nominal peak wavelength........... 850 nm for FOX HD-SDI MM,
1310 nm for FOX HD-SDI SM
Transmission power
Singlemode ......................... -5 dBm, typical
Multimode .......................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ......................... -18 dBm, typical
Multimode .......................... -12 dBm, typical
Optical loss budget
Singlemode ......................... 13 dB, maximum
Multimode .......................... 7 dB, maximum
Video
Signal type ...................................... HD-SDI, SDI, and 3G-SDI digital video
signals
Gain ................................................ Unity
Resolution....................................... 8 or 10 bits, automatic
Data rates ........................................ 270 Mbps, 1.485 Gbps, 2.970 Gbps
Operation standards ..................... SMPTE 259M-C, SMPTE 292M,
SMPTE 424M, ITU-R BT.601,
ITU-R BT.1120, DVB-ASI
Auto data rate lock ........................ Yes
Video input— transmitter
Number/signal type ..................... 1 single link SDI, HD-SDI, or 3G-SDI
digital component video
Connectors .................................... 1 female BNC
Data rates ........................................ 19 Mbps to 2.97 Gbps
Nominal level ................................ 0.8 Vp-p
Minimum/maximum levels ........ 0.5 V to 1 Vp-p with no offset
Impedance ..................................... 75 ohms
Return loss ..................................... <-15 dB @ 5 MHz to 2.97 GHz
DC offset (max. allowable)........... 5 V
Input coupling ............................... AC
Input cable equalization ............... Automatic for up to -30 dB of cable loss
HD-SDI ............................... 120 m (400’) using Extron RG6 cable
90 m (300’) using Extron RG59 cable
SDI ....................................... 150 m (500’) using Extron RG6 cable
120 m (400’) using Extron RG59 cable
N The transmission distance varies depending on the signal
resolution and on the type of cable, graphic card, and display
used in the system.
Video output — receiver
Number/signal type ..................... 2 single link SDI, HD-SDI, or 3G-SDI
digital component video
Connectors .................................... 2 female BNC
Reclocking ...................................... Automatic for 270 Mbps, 1.485 Gbps,
2.97 Gbps, or bypassed for unrecognized
rates
Nominal level ................................ 0.8 Vp-p
Minimum/maximum levels ........ 0.5 V to 1.0 Vp-p
Impedance ..................................... 75 ohms