Elmo L-1EX - Manual (Page 13)

1
PART NAMES
AND
FUNCTIONS
English
Name Function Name Function
(1) POWER
(POWER ON/OFF
standby status)
To turn the power
ON/OFF.
Power ON:
Blue lamp
Power OFF
standby status:
Red lamp
(7) Image
select
(SD mode)
To switch the output
image to images
stored on the SD
card.
The SD Mode LED
is illuminated in SD
Mode.
P.54
(2) OSD
Procedure
P.19
MENU To show/hide the
OSD menu.
The LEDs for op-
eration buttons are
not lit during OSD
menu display.
P.19
(8)
(CAMERA)
To switch the output
image to camera
image.
The LED is illuminated
when camera image is
selected as the output
image.
P.54
(3)
(Direction)
To select an OSD
menu item.
(9)
(PC)
To switch the output
image to the image
input to RGB IN.
The LED is illumi-
nated when RGB IN
image is selected as
the output image.
P.54
(4)
(Decision)
To decide the
OSD item.
(10) Bright-
ness
Adjust
To brighten the
camera image.
P.53
(5)
(Pause)
To pause the
camera image.
Press this button
again to unpause
the video.
(11) To darken the
camera image.
P.53
(12) SD
mode
operation
When SD single
is displayed, it
returns to the
previous image.
In 4 x 4 display, the
cursor for selecting
the image returns
to the previous
image.
(6)
(Image save)
To save the im-
age on the SD
card.
P.37
(13) When SD single is
displayed, it moves to
the following picture.
When 4 x 4 is dis-
played, the cursor for
selecting the image
moves to the follow-
ing image.
(14) Change between
SD image single
display and 4 x 4
display.