Elmo L-1EX - Manual (Page 30)

0
SETTING UP
English
Connecting the AC adapter and Video cable
(1) Connecting to the unit with analog RGB input terminal equipped.
Connect the supplied analog RGB cable to the [RGB OUT] terminal on the rear panel.
• The display position may be displaced from the center of the screen. In such a case,
adjust the horizontal and vertical positions manually from the connected device.
• Vertical stripes may appear on the projector or PC monitor screen. This can be mitigated
by manually adjusting the dot clock from the connected device of the unit with analog
RGB output terminal equipped.
() Connecting to the unit with analog RGB output terminal equipped.
Connect the supplied or commercially available analog RGB cable to the [RGB IN] terminal
on the rear panel.
(1) RGB OUT
terminal
· To projector
· To PC monitor
(5) DC IN 12V terminal
· To power plug
(6) RECORDER terminal
· To desktop recorder
(sold seperately)
(3) VIDEO OUT
terminal
· To TV monitor
(2) RGB IN
terminal
· To PC
(4) USB
terminal
· To PC
N o t e
• When using a laptop PC with external output mode capability, set the laptop PC to
external output mode after pressing the manual operation button [PC] on the main
unit.