Elmo L-1EX - Manual (Page 42)


OPERATION PROCEDURE
English
Presentation using the supplied software with a
USB-connected PC
N o t e
• When the operating panel or the remote control is in operation, do not connect or
disconnect the USB cable, as this could cause the product to malfunction.
• We recommend using a USB 2.0 compliant USB cable.
• Depending on the USB environment used by the PC or peripheral equipment using
the USB 2.0 compliant cable, image transfer may be disrupted.
• Operation is not guaranteed for all environments.
“Image Mate” can be found on the supplied CD-ROM.
The "Image Mate" and TWAIN driver "Image Mate TWAIN" software for controlling this device
can be found on the CD-ROM and allows you to perform the following functions.
• Transfer moving/still images to the PC
• Operate this product from the PC
For information such as PC hardware requirements, OS type, software guides, and the
"Image Mate" installation manual, see the "HELP folder" on the CD-ROM.
N o t e
• Set [USB Mode] to [Application] on the OSD.