Installing wireless connection 3, Minimum system requirements – Casio XJ-H2650 Wireless Function Guide User Manual

Page 9

Advertising
background image

9

Installing Wireless Connection 3

This section explains the minimum computer system requirements and installation methods for
Wireless Connection 3, which is required to project from a Windows computer over a wireless LAN
connection.

Important!

You can download the latest version of Wireless Connection 3 at the CASIO website below.
Some projector models come with a CD-ROM that can be used to install the software.

z Windows

®

7, Windows Vista

®

, or Windows

®

XP pre-installed

z Other requirements of operating system being used
z Normal operation may not be possible under certain hardware configurations.
z Operation is not supported on a computer running Windows

®

2000, NT, Me, 98SE, 98, 95, or 3.1.

z Operation on a computer upgraded to Windows

®

7, Windows Vista

®

, or Windows

®

XP from another

operating system is not guaranteed.

z Operation on a computer running Windows

®

XP Professional x64 Edition is not supported.

Important!

(Mac OS Users)
Wireless Connection 3 runs on Windows only. It does not run on a Mac OS. If you are using a
Mac OS, refer to “Wireless Projection from Mac OS” (page 43).

http://www.casio-intl.com/support/download/

[ Home – Support – Downloads – Projectors ]

Minimum System Requirements

Operating System : Microsoft

®

Windows

®

7, Windows Vista

®

SP2, Windows

®

XP SP3

Computer

: IBM PC/AT or compatible that satisfies the following conditions.

z CPU: Pentium

®

M 1.6GHz or higher, or CPU recommended for operating system being used

z Memory: The amount of memory recommended for operating system being used
z Display: Full-color display with resolution of at least 1024 × 768 that is supported by above

operating systems and the computer being used.

z Input Device: Keyboard or other pointing device (mouse or equivalent device supported by

above operating systems)

z Wireless LAN: Conforms to IEEE 802.11b/g/n. WPA-PSK AES compliant wireless adapter

built in or attached

*

* Under the projector’s initial default settings, WPA-PSK AES is used as the

security protocol during wireless LAN connection with a computer.
Because of this, your computer will need to have a WPA-PSK AES
compliant wireless adapter built in or attached for the initial wireless LAN
connection with the projector.

Advertising