EverFocus EDSR400H - Manual (Page 25)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
21
Alarm Record Setting Menu
Diagram 7
Diagram seven is a screen shot of the Alarm Record Setting Menu. This menu contains
all the alarm operations and options needed to successfully complete an alarm
recording. In the Alarm Record Setting Menu the following fields are defined as:
¾ Alarm Operations: This field is to turn alarm recording on or off. The
Default from the factory is set to on. To change this, simply use the arrow
keys on the DVR which also represent the channel 1-4 keys (These are the
top four buttons). Use the up and down arrow keys to make your
selection.
¾ Recording Speed: This field represents the speed at which the recorder will
be recording the alarm event. To change this, simply use the arrow keys on
the DVR which also represent the channel 1-4 keys (These are the top
four buttons). Use the up and down arrow keys to make your selection.
ƒ Please Note: See Appendix B to find the appropriate speed to fit your
recording needs.
¾ Recording Quality: This field is for setting up video recording quality, this
item lets you set the quality of the video picture for the alarm event by
selecting a compression rate.