EverFocus EDSR400H - Manual (Page 35)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
31
¾ Call Monitor: This field is to set the sequence for the call monitor output.
ƒ Dwell Time: This field represents the rate at which the cameras will
sequence on the call monitor. The dwell time for the auto sequence
can be set from 0 to 99 seconds. To change this, simply use the arrow
keys on the DVR which also represent the channel 1-4 keys (These are
the top four buttons). Use the up and down arrow keys to make your
selection.
ƒ Operation: This field is to select from camera 1 to 4 for the sequence
screen. The default is set to CH1. To change this, simply use the arrow
keys on the DVR which also represent the channel 1-4 keys (These are
the top four buttons). Use the up and down arrow keys to make your
selection.
o
Please Note: If an alarm occurs call monitor will display that
particular camera automatically.
: Press or to move the cursor to the left or right.
: Press or to change the value.
These keys are located at the top left row of keys (same keys
as channel 1-4).