EverFocus EDSR400H - Manual (Page 38)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
34
¾ RS232/RS485 ID: This entry is used to assign each device its own ID code
if more than one unit is used through the RS232/RS485 connection.
There are two ID codes for the DVR: 001 or 002. The default is set to
001. To change this, simply use the arrow keys on the DVR which also
represent the channel 1-4 keys (These are the top four buttons). Use the
up and down arrow keys to make your selection.
: Press or to move the cursor to the left or right.
: Press or to change the value.
These keys are located at the top left row of keys (same keys
as channel 1-4).