Ella Moss Automobile Parts - Manual (Page 14)

M:\Product Information\366-348\Instructions\366-348 MGB Fuel Injection Installation Instructions_Grant_2.doc
Installation Part 6 - Connecting the Harness to the Throttle Body
73. Locate the connector on the harness for the
Idle Air Control Motor and plug it in. (26.1)
366-348 Inst Fig 26D
366-348 Inst Fig 26
26.1 26.1
26.2 26.2
18.1 26.3
366-348 Inst Fig 26B
366-348 Inst Fig 26C
74. Locate the connector on the harness for the
Fuel Injector and plug it in. (26.2)
75. Locate the connector on the harness for the
Throttle Position Sensor (TPS) and plug it in.
(26.3)
76. Each connector has clips that lock the
connector in place; make sure these are
engaged after you plug in the connector.
All three connectors are unique and there is no
way to make a mistake plugging them in.
This completes part 6 of the installation.
Page 14 of 52