Powerplus POW4820 POWER G ENERATOR 2000W DIGITAL EN User Manual

Page 6

Advertising
background image

POW4820-POW4830(SC)

EN

Copyright © 2010 VARO

P a g e

| 6

www.varo.com

§ Keep away from cigarette, smoke and sparks when re-fuelling the generator, Always

refuel in a well ventilated location.

§ Wipe up spilled gasoline at once.
§ Connections for standby power to a building's electrical system must be made by a

qualified electrician and must comply with all applicable laws and electrical codes.
Improper connections can allow electrical current from the generator to back feed into the
utility lines. Such back feed may electrocute utility company workers or others who contact
the lines during a power outage, and when utility power is restored, the generator may
explode, burn, or cause fires in the building's electrical system.

§ Always make a pre-operation inspection before you start the engine. You may prevent an

accident or equipment damage.

§ Place the generator at least 1m (3ft) away from buildings or other equipment during

operation.

§ Operate the generator on a level surface. If the generator is tiled, fuel spillage may result.
§ Know how to stop the generator quickly and understand operation of all the controls.

Never permit anyone to operate the generator without proper instructions.

§ Keep children and pets away from the generator when it is in operation.
§ Keep away from rotating parts while the generator is running.
§ The generator is a potential source of electrical shocks when misused; do not operate with

wet hands.

§ Do not operate the generator in rain or snow and do not let it get wet.

6

SAFETY LABEL LOCATIONS

These labels warn you for potential hazards that can cause serious injury. Read the labels and
safety notes and precautions described in the manual carefully.
If a label comes off or becomes hard to read, contact your dealer for a replacement.
Fig 2

2.1

Avoid fire label

2.2

Avoid burn label

2.3

Parameter label

Fig 3

3.1

Label “forsee ventilation”

3.2

Label primer bulb

7

PRE-OPERATION CHECK

Be sure to check the generator on a level surface with the engine stopped.

7.1

Check the engine oil level.

Using non-detergent oil or 2-stroke engine oil could shorten the engine's
service life.

Use high-detergent, premium quality 4-stroke engine oil, certified to meet or exceed
U.S.automobile manufacturer's requirements for API Service Classification SG, SF. (15W40)
Select the appropriate viscosity for the average temperature in your area.

Advertising